Farrowing Crate sizes

• 84″ Standard Farrowing Crate
• 90″ Standard Farrowing Crate
• 96″ Standard Farrowing Crate

Features

• Crate made with 1 ¼″ – 16 gauge 304 stainless steel
• Anti-Crush Bars prevent sows from laying on piglets
• Flip-out Feeder Latch: Top latch on head-gate releases to flip feeder out and down for easy cleaning.
• Rump Bar provides safety to pigs when sow lays down.
• Drop-slide Latch Plate is easy operation to open and close the front and rear gates

Accessories

• Sow feeder and waterer
• Creep panels (304 SS and mild steel)
• C-channels (304 SS and mild steel)
• Sow card holder

SDI produces beautiful stainless steel gating packages for your new construction or remodel projects. SDI will design the layout to meet your needs.

Features

• All materials – 304 SS
• Top Bar – 1 ½ inch round 16 gauge 304 SS tube
• Middle Bar (7) – ⁵⁄_8 inch round – 16 gauge 304 SS tube
• Gate Straps – 10 gauge 304 SS
• T-Post – 7 gauge 304 SS base and upright
• Square Posts – 7 gauge 304 SS base, 2 inch x 2 inch 7 gauge square tube
• Height – 30 inches
• Hardware – ³⁄_8 inch

SDI farrowing crates promote health and safety for the sow and litter. The SDI Standard Crate was designed with an independent crush bar and a contoured finger bar that allows more space for the sow to lay down during feeding.

Features

• Frame: SDI uses 7/8” solid rod in the manufacturing of the side, front, and rear gates, making it one of the most durable farrowing crates on the market. The front and back doors mount to the floor allowing for a sturdier crate and for easier installation.
• Anti-crush bar: The independent anti-crush bar, a 7/8” solid round bar, provides the right amount of resistance to allow the sow to lay down safely when feeding.
• Contoured Finger bar: Allow the sow more comfort and space to lay down when nursing with the contoured finger bar while allowing more safety for the litter. Fingers are welded onto the contoured finger bar.
• Rump Gate: Rump plate available in various material options. The rump bar is bolted on the rump gate, the 7/8” solid bar promotes safety of the litter when the sow lies down.
• Sow Feeders: Head gates are manufactured to mount SDI’s industry leading sow feeders.

SDI’s mild steel gating works well for new construction and remodel projects. SDI will design the layout to meet your needs.

Features

• Top Angle – ¾ inch x ¾ inch x ¹⁄_8 inch
• Middle Bar – ³⁄_8 inch round bar
• Bottom Bar – ½ inch round bar
• Straps – 7 gauge
• Finish – Raw, powder coated, or galvanized
• Hardware – ³⁄_8 inch
• Height – 28 inch, 30 inch

Built with durability and ease of construction in mind, SDI stanchions are made with top grade materials and SDI craftsmanship. SDI stanchions can be powder coated, raw, or galvanized. Constructed with quality materials, the top angle of the SDI stanchion is made with 1 1/2” x 1 1/2” x 3/16” top angle. End straps are made with 1/4” flat straps. The middle bars are made of 1/2” solid rod and the bottom bar made of 3/4” solid rod. Stanchions bolt to floor anchor straps with 1/2” stainless steel hardware fasteners. Floor straps, made with 1 1/2” wide, 7-gauge 304 stainless steel, help resist corrosion.

Gestation Gating

• Height - 40”
• Top Angle - 3/16” x 1 1/2” x 1 1/2”
• Middle (9) - 1/2” round bar
• Bottom - 3/4” round bar
• Gate straps - 1/4”
• Hardware - 1/2” 304 stainless steel

Features

• Feed Tubes: Feed tubes can be bolted on at the height that maximizes feed efficiency. Feed tubes can be powder coated, raw, or galvanized.
• Troughing: Feed troughs, constructed with 304 stainless steel, resist corrosion. Troughs are available in 18-gauge or 16-gauge.